Electric Core Drilling machine with Vacuum Facility

ELECTRIC CORE DRILLING MACHINE WITH VACUUM FACILITY

ELECTRIC CORE DRILLING MACHINE WITH VACUUM FACILITY

 

CT67-130         ELECTRIC CORE DRILLING MACHINE WITH VACUUM  FACILITY

This lightweight machine is easy to operate, designed to carryout core drilling on concrete, reinforced concrete, asphalt, etc. As the base made in pad form, it clings in few seconds to the wall by means of an electrical vacuum pump. This vacuum pump makes the machine remain, very sturdy anchored to surface under test. This machine can drill in any horizontal, intermediate, or vertical position, under the only condition that the surface is sufficiently flat to alloy the vacuum attachment, thus eliminating all the anchoring problems given by a traditional core drilling machine. With it’s low weight allowing a very easy manipulation and execution of the test. Supplied with built-in water swivel, two-speed gearbox, speed reducer and friction device and having 2200 watt power. 420 and 900 rpm coring speed. This drilling machine is designed to core up 200 mm hole diameter, while drilling excursion is 550 mm. The aluminum casting base frame equipped with two wheels to facilitate site transport. All working and movement parts are treated with rust protection, while the base is painted finished. This core drilling machine is supplied complete with electric motor, vacuum pump and connections but without diamond core bit.

Voltage 229 V AC, 1 Phase, 50 Hz.

Price : Contact us

Leave a Reply